We don't sell one coating against every application. Each system below exists because a specific environment — chemical exposure, thermal shock, wheel load — kills the alternatives.
For distribution centers, 3PL warehouses, and high-throughput logistics floors. Forklift abrasion, pallet impact, light reflectivity, and OSHA line striping are the design priorities.
For commercial kitchens, breweries, bakeries, dairies, and food processing. Survives blast-freezer thermal shock and 200°F washdowns. Integral cove base eliminates bacteria-harboring corner seams.
For machine shops, plating lines, battery rooms, automotive bays, and chemical containment areas. Resists oil saturation, acids, solvents, and impact from dropped tooling.
Most coating failures aren't coating failures — they're prep failures or moisture-mitigation oversights. We address both before the topcoat is ever scheduled.
Calcium chloride or RH probe testing per ASTM, plus epoxy-based moisture-mitigation primer when readings warrant. Required on most older slabs poured without a sub-slab vapor barrier.
Diamond grinding or shot-blast profiling to the CSP (Concrete Surface Profile) required by the topcoat manufacturer. Crack chase, fill, and joint stabilization included where needed.
OSHA-aligned aisle marking, equipment zones, hazard markings, pedestrian walkways, and forklift-rated thermoplastic striping. Coordinated with your safety officer's plan.
If you already know the system you need, say so. If you don't, describe the environment — chemicals, temperatures, traffic — and we'll write the spec. Typical first response: same business day.
Three fields. We'll follow up to gather what we need.
Call us. Ten minutes on the phone usually answers it.